Welcome To b2b168.com, Join Free | Sign In 中文(简体) | 中文(繁體) | Francés |Español |Deutsch |Pусский | | No.3353005
- Product Categories
- PE adhesion promoter
- Water-based paint adhesion ..
- Water-based Printing Auxili..
- Oil-based paint adhesion pr..
- Screen printing supplies, i..
- One-component water-based p..
- Friendly Links
|Information Name:||Supply PE adhesion promoter primer PFAZ-248PE|
|Detailed Product Description：|
PFAZ-248 PA - 101 PE plastic adhesion promoter for use One. Performance: PE plastic primer ----- PA-101 Adhesion promoter for the new PE, PE substrate-specific R & D, on the untreated PE has excellent adhesion to the substrate. Ingredients: polymers Content: 100% active ingredients Density: 0.9 Appearance: brown liquid Viscosity: 400 Uses: Specifically developed for PE plastic film substrate additives to increase the water / oil-based paint adhesion on plastic substrates. After spraying a thin layer, then spray water / oil-based plastic paint, surface treatment can be difficult for the PE and other plastic substrates to provide a variety of color products, a variety of surface modification of PE plastic. No baking, dry. Storage: Store in a cool ventilated place. To each container tightly closed after use, seal. PFAZ-248 Transparent liquid To the substrate only for ordinary grease, dust, impurities, processing, and then using this coating, a thin layer of effects that is, time and material, scratch resistant rub. The thinner the coating the better. II. Using the methods and procedures: 1. First with thinner cleaning spray equipment. 2. With PFAZ-248 or PA-101 PE coating the substrate and let stand for 10-15 minutes until dry. 3. Spray plastic finish, the natural drying 4.48 hours after the test results. III. Technical guidelines: a) When dealing with the rainy or cold bleaching, you can add 5-15% of the anti-white water solvent (relative humidity 80-90%), but too much will affect the drying rate. b) commercial diluent or retirement of the substrate material may be corrosive affect paint adhesion. Please try to use the designated supporting thinner. IV. Notes: This product specification is based on theoretical and experimental parameters obtained in this company, because many varieties of PE plastic material, the surface tension of different adhesion of paint, so please confirm the trial version before production. For best results, or further technical support, please contact our marketing and technical service center in order to obtain surface treatment and construction of technical guidance.